Here you will find batteries and solar components to replace existing ones where appropriate. If you are looking for advice or information, please contact us by phone or email.
The YUASA 12 Volt – 2.3 Ah battery is built into the lid of the electronic unit. There are 2 batteries in the lid of the unit.
This battery is used on the AKIA Star 24 wheeled automation equipment.
Battery dimensions are 180 x 35 x 60 mm
The YUASA 12 Volt – 7 Ah battery is used on AKIA Star Pro swing gate automation equipment, AKIA Menor and Mayor sliding gate automation equipment and AKIA Swing and Twin swimming pool enclosure automation equipment.
On our wheeled motor drives you will find 2 batteries in the electronic unit of the Star Pro kit or the frame of the kits for sliding gates and swimming pool enclosures.
The dimensions of a battery are 150 x 65 x 95 mm.
The 12V - 25W solar panel is used for wheeled motor drives for gates
The dimensions of the 12V - 25W solar panel are 650 x 305 x 30 mm
The 12V - 10W flat and square solar panel can be used for AKIA SWING swimming pool enclosure automation equipment
Its dimensions are 305 x 305 x 25mm.
The 24V - 20W solar panel is designed to power AKIA TWIN wheeled motor drives for swimming pool enclosures.
The dimensions of this solar panel are 660 x 310 x 35mm
The 24V - 30W solar panel is used to power AKIA BI-TWIN swimming pool enclosure automation equipment.
Its dimensions are 550 x 450 x 30mm.
The purpose of the 12-24V charge controller included in our motor drives for swimming pool enclosures is to limit the charging and discharging of batteries, thereby optimising battery life.