AKIA GEARED MOTORS OR MOTORS
AKIA’s wheeled motor drives have been in operation since 1993 and, as with all products, wear and tear may occur. You may need to replace certain parts of your gate or swimming pool enclosure motor drives.
AKIA’s philosophy is to enhance the durability of its automation equipment by enabling the replacement of any defective part : motor, complete module, safety device, etc.
Whatever your problem, if you need further information, please contact us.
All AKIA motors for wheeled motor drives
AKIA 300 12v Left geared motor
Ref.: 104633
When installed, the wheel is on the left side of the motor.
Motor without encoder for former generation of 12V AKIA System automation equipment and SWING motor drives for swimming pool enclosures.
AKIA 300 12v Right geared motor
Ref.: 104634
When installed, the wheel is on the right side of the motor.
Motor without encoder for former generation of 12V AKIA System automation equipment and SWING motor drives for swimming pool enclosures.
Moto-réducteur type AKIA 300 24v Gauche
Ref.: 104658
When installed, the wheel is on the left side of the motor.
Motor with encoder for STAR 24 and MENOR
AKIA 300 24v Right geared motor
Ref.: 101629
When installed, the wheel is on the right side of the motor.
Motor with encoder for STAR 24 and MENOR
AKIA 600 24v Left geared motor
Ref.: 101786
When installed, the wheel is on the left side of the motor.
Motor with encoder for STAR PRO, MAYOR and TWIN
AKIA 600 24v Right geared motor
Ref.: 100753
When installed, the wheel is on the right side of the motor.
Motor with encoder for STAR PRO, MAYOR and TWIN
Gear for AKIA 300 geared motors
Gear, also known as notched wheel or pinion, with axis onto which the wheel is fitted for STAR 12, STAR 24, MENOR and SWING.
Ø 57mm – Axis length 51 mm
Gear for AKIA 600 geared motors
Gear, or notched wheel, or pinion, with axis onto which the wheel is fitted for STAR PRO, MAYOR and TWIN.
Ø 78mm – Axis length 67mm
Star 24 and Menor motor encoder
The encoder is used to measure the number of rotations and the wheel’s direction of travel to trigger deceleration and stop the leaf.
Star Pro and Mayor motor encoder
The encoder is used to measure the number of rotations and the wheel’s direction of travel to trigger deceleration and stop the leaf.
Supplied with transient voltage suppression diode to be plugged into the terminal block.