MOTIVE POWER SYSTEM FOR SLIDING GATES
While AKIA sliding gate motor drives are extremely durable, certain parts may suffer wear and tear.
Since 1993, we have been providing you with motor drive kits for which you can find spare parts. We believe it is our duty to limit the impact of waste.
Don’t forget that all our covers can be painted in the same colour as the gate, which is a real bonus in terms of design.
We remain at your disposal should you need any advice or estimates.
Parts for sliding gate motive power system
Wheel with hub for MENOR
Soft rubber wheel Ø 160 mm with axis made of thermo-galvanised steel for AKIA 300 geared motor.
Wheel with hub for MAYOR
Soft rubber wheel Ø 160 mm with axis made of thermo-galvanised steel for AKIA 600 geared motor.
L195 250N gas strut
Ground pressure strut. Length: 195 mm, stroke: 60 mm.
For MENOR and SWING kits.
Ressort à gaz 300 N L 235
Ground pressure strut. Length: 235 mm, stroke: 80 mm.
For MAYOR and TWIN kits.
Charge contactor – mobile part
Contactor fixed onto the frame to recharge batteries, with double silver contact on stainless steel substrate.
Charge contactor – fixed part
Contactor anchored to the ground to recharge batteries, stainless steel substrate.
Electric lock packaged with strut
Dim : 115 x 43 x 25 mm.
MENOR cover
The cover of the motor module is made of polyester and can be painted in the same colour as the gate. It slips onto the frame and is easily removed.
Dimensions: 325 x 165 x 212mm
AKIA MAYOR or TWIN cover
The cover of the motor module is made of polyester and can be painted in the same colour as the gate. It slips onto the frame and is easily removed.
Dimensions: 363 x 195 x 195 mm
AKIA BI-MAYOR or BI-TWIN cover
The cover of the motor module is made of polyester and can be painted in the same colour as the gate. It slips onto the frame and is easily removed.
Dimensions: 540 x 195 x 220 mm