MOTOR DRIVE SAFETY DEVICES
Safety for AKIA France gate motor drive
Safety devices are important for gate motor drives and compulsory for collective installations. Their purpose is to alert and protect individuals nearby when the gate is in operation :
- Photocells emit a beam when the gate is in operation. If the beam is crossed by a person, animal or vehicle, the gate stops.
- Flashing lights, lamps and rotating lights indicate that the automation equipment is in operation.
Photocell, light, lamp, flashing rotating light for gate
You can replace a defective safety device at any time; contact us if you need more information.
Set of 12/24 CIREA photocells
CIREA 12 Volt AC-DC photocells are surface-mounted. Safety photocells have a range of 10 metres.
Set of VIKY 30 photocells
Pair of photocells for outdoor use ; VIKY 30 photocells have a range of 30 metres.
Their dimensions are 92 x 64 x 25mm.
Small column for VIKY 30 photocell
The pair of columns for Viky 30 photocells help position the photocells. They are made of anodised aluminium, which makes the unit robust and stylish.
height 500mm
12/24V flashing light (lamp)
The dimensions of the 12-24-230 Volt LED flashing light with antenna are 80 x 67mm. It is 150mm high with the antenna.
IDEA 12+, 12V - 10W flashing light
The IDEA 12+, 12V - 10W flashing light is equipped with a 433.92 MHz tuned antenna placed inside a shock-resistant polycarbonate housing. To be installed on AKIA PU2M board with pre-wired Bosch relay.
Mounted on a post. Dimensions 140 x 120 x 80mm.
Nice white LED flashing light
The Nice white LED flashing light is a signal lamp which can be mounted on a façade, wall or ceiling with an adjustable light beam.
The diameter of the lamp is 88mm and its thickness is 22mm.
10W LED spotlight
Spotlight with a power equivalent to 100W.
Luminous flux: 700 Lm, 6000 K, IP 67.
Dimensions: 115 x 85 x 87mm (depth)
20W LED spotlight
Spotlight with a power equivalent to 200W.
Luminous flux: 1400 Lm, 6000 K, IP 67.
Dimensions: 181 x 135 x 104mm (depth)