Electric locks are used to lock a motor drive shut, so that your gate cannot be pushed open.
While intended for our wheeled motor drive systems, you can replace it if its location is a problem for you, or add another for a very high gate or carriage entrance for example.
You will find the electric locks for wheeled motor drive suited to horizontal or vertical fastenings, with or without a European cylinder, etc. If you have any questions, please contact us by phone or email.
The AKIA remote electric lock comes in a metal case.
It is used, among other things, to replace the original lock of the motor module if the height between the gate and the ground makes it impossible for the bolt to engage in the latch.
Dimensions are 200 x 87 x 35 mm.
AKIA standalone remote controlled electric lock comes in a metal case. Battery included.
Dimensions are 200 x 87 x 35 mm.
The VIRO 12-24 electric lock with pivoting bolt, vertical latch without a cylinder (or European cylinder) is used to reinstall the old cylinder.
Must be installed with the pre-wired Bosch relay.
The VIRO 12-24 electric lock with pivoting bolt, horizontal latch without a cylinder (or European cylinder) is used to reinstall the old cylinder.
Must be installed with the pre-wired Bosch relay.
The VIRO 12-24 volt electric lock with pivoting bolt, vertical latch and cylinder (or European cylinder) is used to replace the entire lock.
Must be installed with the pre-wired Bosch relay.
The VIRO 12-24 volt electric lock with pivoting bolt, horizontal latch and cylinder (or European cylinder) is used to replace the entire lock.
Must be installed with the pre-wired Bosch relay.